Water Quality Reports

RSS

Problems We Found In San Antonio Drinking Water

Kezia Snipe @ Wednesday, September 13, 2017 at 2:45 am -0400

Kezia Snipe  |  Hydroviv Research Analyst

***Updated to include 2020 water quality data***

We've updated our water quality report for San Antonio to include 2020 data. Our Water Nerds analyzed the most recent available data from the San Antonio Water System, U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. We compare these data with toxicity studies in scientific and medical literature, and look at upcoming regulatory changes. The water filters that Hydroviv builds for San Antonio customers are optimized with these numbers in mind.

Source Of San Antonio Drinking Water

The San Antonio Water System draws groundwater from the Edwards, Carrizo and Trinity aquifers. In certain areas and, San Antonio will draw surface water from Canyon Lake.

Lead In San Antonio Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing. When corrosion control measures put in place by the municipality fail (like what recently happened in Flint, Michigan), lead leaches into the drinking water, and can reach dangerous levels. Currently, 10% of samples analyzed for lead in San Antonio are 3.25 parts per billion. Though San Antonio's water quality is in compliance with federal regulations, EPACDC and The American Academy of Pediatrics all agree that there is no safe level of lead for children.

Chromium 6 In San Antonio Drinking Water

Chromium 6 is an extremely toxic metal that is not currently regulated by the EPA. In recent years, San Antonio tap water has averaged 136 parts per trillion for Chromium 6. For the sake of perspective, these levels are nearly 7 times higher than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In San Antonio Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter in water. Although these chemicals are not well regulated, EPA has acknowledged that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About San Antonio Drinking Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for San Antonio's water quality, but all of our filters provide broad protection against a wide range of contaminants (including lead).

Recommended Articles For You
What Do I Need To Know About Lead?
How Do I Remove Chromium 6 Contamination From My Drinking Water?
Disinfection Byproducts In Your Drinking Water

Problems We Found In Minneapolis Drinking Water

Emma Schultz @ Tuesday, September 12, 2017 at 3:52 am -0400

Emma Schultz, M.S. | Scientific Contributor
Updated May 14, 2021 to include most current data available

For our 2020 assessment of Minneapolis drinking water, our team aggregated the most recent available information. We analyzed data from the City of Minneapolis Public Works, the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. Our Water Nerds then cross reference Minneapolis water quality data with toxicity studies in scientific and medical literature.

Minneapolis Source Water

Minneapolis sources its drinking water from a mix of surface and groundwater. About 25% of Minneapolis water is sourced from the Mississippi River, and the remaining 75% comes from local groundwater sources. 

Chromium 6 In Minneapolis Drinking Water

Chromium 6 (also known as hexavalent chromium) is a highly toxic metal that not currently regulated by the EPA. Minneapolis tap water concentrations in Minneapolis have recently averaged 288 parts per trillion for Chromium 6. For a bit of context, these levels are over 10 times higher than the levels considered to have a negligible impact on cancer risk.

Disinfection Byproducts (DBPs)

Disinfection byproducts (DBPs) are a category of halogenated emerging contaminants that form when chlorine-based disinfectants combine with naturally-occurring organic matter. Although these chemicals are not yet tightly-regulated, the U.S. Environmental Protection Agency reports that high levels are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. While Minneapolis drinking water quality is in compliance with EPA regulations, Haloacetic Acid (HAA5) concentrations are on the high end (up to 29.7 ppb in the most recent report), and Total Trihalomethanes (TTHMs) were as high as 29.2 ppb.

Chloramine

While most cities use chlorine as the primary disinfectant, Minneapolis tap water is disinfected with chloramine, which is produced by mixing chlorine and ammonia. Chloramine is typically responsible for what customers often report as the “bad taste” of tap water, and unlike chlorine, does not dissipate if a container of water is left in the fridge overnight. Most one-size-fits-all water filters use filtration media that doesn’t adequately remove chloramine, but the filters that Hydroviv builds for Minneapolis' water quality uses special filtration media that are purpose-built to remove chloramine as well.

Lead

Lead is a toxic heavy metal that can a major negative impact on the development of infants and children. While the city is currently in compliance with federal regulations, EPA, CDC and the American Academy of Pediatrics all acknowledge that there is no safe level of lead for children. In comparison to the rest of the US, citywide lead concentrations in Minneapolis are relatively low, but roughly 10% of the sampled taps are over 3.8 parts per billion. However, the concentrations measured at an individual tap can be much higher, particularly if your home has plumbing that contains lead pipes, fixtures, or valves.

Still Have Questions?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The chemicals that we list above are what we consider to be “points of emphasis” so we can build the best water filter for Minneapolis tap water, but all of our water filters provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, lead, solvents, pesticides, mercury).

Other Articles We Think You'll Enjoy

The 5 Biggest Complaints About Reverse Osmosis Water Filters
Why Is Chloramine So Hard To Filter From Drinking Water?
How To Filter Chromium 6 From Drinking Water

Problems We Found With St. Louis Tap Water

Emma Schultz @ Saturday, September 30, 2017 at 1:29 pm -0400

Emma Schultz, M.S.  |  Scientific Contributor 
**Updated to include 2021 water quality data

Our Water Nerds have updated our assessment of St. Louis drinking water to include the most recent available data. To do this, our team looked at water quality test data from the City of St. Louis Water DivisionU.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. Our Water Nerds then cross-reference these data with toxicity studies in scientific and medical literature, and look at upcoming regulatory changes. The water filters that we sell in St. Louis are optimized with these water problems in mind.

Mississippi River: Source Of St. Louis Tap Water

St. Louis tap water is surface water-sourced. The Howard Bend water treatment facility draws water from the Mississippi River, and the Chain of Rocks treatment plant draws primarily from the Missouri River, though its location south of the confluence of Missouri and Mississippi Rivers means it sources Mississippi River water as well.

Alarming Levels Of Chromium 6 In St. Louis Tap Water

Chromium 6 is a highly toxic metal that, despite its toxicity, is not currently regulated by the EPA. St. Louis tap water has recently averaged a startling 1600 parts per trillion for chromium 6. To better understand why this should be of concern to St. Louis residents, these levels are 63 times higher than the concentration determined to have a negligible impact on cancer risk. Because chromium 6 comes from the water supply (not the pipes), we HIGHLY recommend that all St. Louis residents take steps to filter chromium 6 from their water. Boiling or freezing water does not remove chromium 6.

Lead In St. Louis Tap Water

Lead enters into tap water through aged lead service pipes and lead-containing plumbing. When corrosion control measures fail (as recently happened in Flint, Michigan), lead leaches into the drinking water, and can reach toxic levels. Recent analysis for lead in St. Louis found the 90th percentile of sampled concentrations at 1.03 parts per billion. While the city is in compliance with federal regulations, EPACDC and American Academy of Pediatrics, all acknowledge that there is no safe level of lead for children. In addition to this, federal regulations also cannot take into account levels measured at an individual tap. We encourage St. Louis residents that live in older homes to get their water tested by an accredited laboratory. This article gives homeowners guidance on how to test for lead in the home.

Disinfection Byproducts (DBPs) In St. Louis Tap Water

Disinfection byproducts (DBPs) are a type of emerging contaminants that occur when chlorine-based disinfectants, added to the water supply, react with naturally-occurring organic matter found in the water. While these chemicals are not well-regulated, the EPA has stated that they have been linked to increased risks of bladder cancer, and kidney, liver, and central nervous system problems. St. Louis tap water has recently had moderately high levels of the two regulated classes of DBPs (total trihalomethanes and haloacetic acids 5). 

Chloramine Is Used In St. Louis Tap Water Instead of Chlorine

While most cities use chlorine as their primary disinfectant, St. Louis water is disinfected with chloramine (a product of chlorine and ammonia). Chloramine is primarily responsible for what customers often report as the “bad taste”of tap water, and unfortunately does not dissipate if a container of water is left in the fridge overnight. Most one-size-fits-all water filters use filtration media that doesn’t adequately remove chloramine, but the water filters that Hydroviv builds for St. Louis use special filtration media that are purpose-built to remove chloramine as well.

Still Have Questions About St. Louis Tap Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The chemicals that we list above are what we consider to be “points of emphasis” so we can design and build the best water filter for St. Louis tap water, but all of our water filters provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, heavy metals, pharmaceuticals, solvents, pesticides, mercury).

Please Share This St. Louis Water Quality Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You
How Can St. Louis Residents Filter Chromium 6 From Drinking Water?
What Do I Need To Know About Endocrine Disruptors In Drinking Water?
How Did An Asphalt Plant Contaminate Corpus Christi's Water?


Problems We Found In Jacksonville, Florida Drinking Water

Analies Dyjak @ Wednesday, September 13, 2017 at 3:08 am -0400
The Jacksonville Electric Authority (JEA) delivers more than 110 million gallons of water each day to most of Duval County, parts of St. Johns County, and Yulee in Nassau County. Jacksonville drinking water includes the following contaminants of concern: LeadArsenicPFAS, and Disinfection Byproducts. Hydroviv uses this information to build custom water filters for our customers in the Jacksonville area. Jacksonville drinking water includes the following contaminants of concern: LeadArsenicPFAS, and Disinfection Byproducts.

Problems We Found In Pasadena's Drinking Water

Analies Dyjak @ Friday, December 15, 2017 at 11:28 am -0500

Kezia Snipe  |  Hydroviv Research Analyst


For Hydroviv’s assessment of Pasadena's city water quality, we aggregated water quality test data from Pasadena Water and Power, the city’s water provider and the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. We cross reference these data with toxicity studies in the scientific and medical literature, and delve into upcoming regulatory changes. The water filters that we offer at Hydroviv are optimized with these numbers in mind.

Sources Of Pasadena Drinking Water

In 2016, PWP produced 26,890 acre-feet or 8.8 billion gallons of water, to serve approximately 166,000 consumers in Pasadena, portions of the unincorporated areas of Altadena, East Pasadena, and San Gabriel. During the year, nearly 40 percent of the water supply was pumped from local groundwater, whereas 60 percent came from imported surface water purchased from the Metropolitan Water District (MWD). Less than 1 percent was purchased from neighboring water agencies that combine surface water and groundwater.

Lead In Pasadena Drinking Water

Lead enters Pasadena's city water through older lead service pipes and lead-containing plumbing. When corrosion control measures put in place by the municipality fail (like what happened in Flint, Michigan), lead leaches into the drinking water, and can reach dangerous levels. Currently,10% of samples analyzed for lead in Pasadena are 1.7 parts per billion. Though in compliance with federal regulations, EPA and CDC both acknowledge that there is no safe level of lead, and federal regulations do not take into account levels measured at an individual tap. The American Academy of Pediatrics recommends that any taps used to serve children have lead levels no higher than 1 part per billion.

Very High Chromium 6 Levels In Pasadena Drinking Water

Pasadena's water quality was reported with very high levels of Chromium 6. Chromium 6 is a highly toxic metal that is not currently regulated by the EPA. In recent years, the city’s tap water has averaged a concerning 1900 parts per trillion for Chromium 6. For a bit of perspective, these levels are 95 times HIGHER than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Pasadena Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA has admitted that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About Pasadena Drinking Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Pasadena, but all of our our filters provide broad protection against a wide range of contaminants (including lead).

If you’re interested in learning more about water filters that have been optimized for Pasadena tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news onTwitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople).

Please Please Share This Pasadena Water Quality Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You

How Do I Remove Chromium 6 Contamination From My Drinking Water?
Disinfection Byproducts In Your Drinking Water