Performance Data Sheet 

This filter is designed to be used with cold water. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water. Do not use with water that is microbiologically unsafe, or of unknown quality, without adequate disinfection before or after the system. Replacement filters may be purchased at www.hydroviv.com. 

 
Technical Specifications 

Rated Capacity: 1360.8 L (360 Gallons): HYDROVIV-US-SRS-14cZIP, HYDROVIV-US-SRS-46cZIP, HYDROVIV-US-SRS-75cZIP, HYDROVIV-US-SRS-16nZIP, HYDROVIV-US-SRS-49nZIP, HYDROVIV-US-SRS-78nZIP

Rated Capacity: 1703.4 L (450 Gallons): HYDROVIV-US-SRS-18pZIP, HYDROVIV-US-SRS-43pZIP, HYDROVIV-US-SRS-74pZIP

Rated Capacity: 2271.2 L (600 Gallons): HYDROVIV-US-SRS-13xZIP, HYDROVIV-US-SRS-48xZIP, HYDROVIV-US-SRS-71xZIP, HYDROVIV-US-SRS-15mZIP, HYDROVIV-US-SRS-47mZIP, HYDROVIV-US-SRS-76mZIP

Rated Service Flow: 3.78 L/Min (1 Gallon/Min): HYDROVIV-US-SRS-14cZIP, HYDROVIV-US-SRS-46cZIP, HYDROVIV-US-SRS-18pZIP, HYDROVIV-US-SRS-43pZIP, HYDROVIV-US-SRS-13xZIP, HYDROVIV-US-SRS-48xZIP, HYDROVIV-US-SRS-15mZIP, HYDROVIV-US-SRS-47mZIP, HYDROVIV-US-SRS-49nZIP, HYDROVIV-US-SRS-16nZIP

Rated Service Flow: 2.72 L/Min (.72 Gallon/Min): HYDROVIV-US-SRS-71xZIP, HYDROVIV-US-SRS-74pZIP, HYDROVIV-US-SRS-75cZIP, HYDROVIV-US-SRS-78nZIP, HYDROVIV-US-SRS-76mZIP

Operating Pressure Range: 68.95-689.47 kPa (10-100 psi) 
Min Operating Temp: 1C (34F) 
Max Operating Temp: 30 C (90F) 

Claims
For Under Sink Model No. HYDROVIV-US-SRS-14cZIP, Replacement Element HYDROVIV-REP-SRS-14cZIP. For Under Sink Model No. HYDROVIV-US-SRS-46cZIP, Replacement Element HYDROVIV-REP-SRS-46cZIP.  

For Under Sink Model No. HYDROVIV-US-SRS-75cZIP, Replacement Element HYDROVIV-REP-SRS-75cZIP. 

These systems have been tested according to NSF/ANSI 42, 53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53. Testing was performed under laboratory conditions. Actual performance may vary. HYDROVIV-US-SRS-13xZIP and HYDROVIV-US-SRS-48xZIP are not certified for PFOA/PFOS and VOC reduction claims. HYDROVIV-US-SRS-18pZIP, HYDROVIV-US-SRS-43pZIP, HYDROVIV-US-SRS-71xZIP and HYDROVIV-US-SRS-74pZIP are not certified to VOC reduction claim.

NSF/ANSI Standard 

Substance 

Influent Challenge Concentration (mg/L) 

% Required Reduction/Max Permissible Concentration 

NSF/ANSI 42 Aesthetic Effects 

Chlorine Taste and Odor 

2.0 +/- 10% 

50% 

NSF/ANSI 53 Health Effects 

Lead (pH 6.5) 

0.15 +/- 10% 

0.005 mg/L 

NSF/ANSI 53 Health Effects 

Lead (pH 8.5) 

0.15 +/- 10% 

0.005 mg/L 

NSF/ANSI 53 Health Effects 

PFOA/PFOS 

0.0015 +/- 20% 

0.02 ug/L 

NSF/ANSI 53 Health Effects 

VOC Surrogate Test 

0.300 +/- 10% 

95% 

 

 
Performance data sheet reduction claims for organic chemicals included by surrogate testing 

 

Substance 

Influent challenge concentration (mg/L) 

Maximum permissible product water concentration (mg/L) 

alachlor 

0.050 

0.001 

atrazine 

0.100 

0.003 

benzene 

0.081 

0.001 

carbofuran 

0.190 

0.001 

carbon tetrachloride 

0.078 

0.0018 

chlorobenzene 

0.077 

0.001 

chloropicrin 

0.015 

0.0002 

2,4-D 

0.110 

0.0017 

dibromochloropropane (DBCP) 

0.052 

0.00002 

o-dichlorobenzene 

0.080 

0.001 

p-dichlorobenzene 

0.040 

0.001 

1,2-dichloroethane 

0.088 

0.0048 

1,1-dichloroethylene 

0.083 

0.001 

cis-1,2-dichloroethylene 

0.170 

0.0005 

trans-1,2-dichloroethylene 

0.086 

0.001 

1,2-dichloropropane 

0.080 

0.001 

cis-1,3-dichloropropylene 

0.079 

0.001 

dinoseb 

0.170 

0.0002 

endrin 

0.053 

0.00059 

ethylbenzene 

0.088 

0.001 

ethylene dibromide (EDB) 

0.044 

0.00002 

haloacetonitriles (HAN) 
  bromochloroacetonitrile 
  dibromoacetonitrile 
  dichloroacetonitrile 
  trichloroacetonitrile 

0.0005 
0.0006 
0.0002 
0.0003 

0.0005 
0.0006 
0.0002 
0.0003 

haloketones (HK) 
  1,1-dichloro-2-propanone 
  1,1,1-trichloro-2-propanone 

0.0072 
0.0082 

0.0001 
0.0003 

heptachlor 

0.025 

0.00001 

heptachlor epoxide 

0.0107 

0.0002 

hexachlorobutadiene 

0.044 

0.001 

hexachlorocyclopentadiene 

0.060 

0.000002 

lindane 

0.055 

0.00001 

methoxychlor 

0.050 

0.0001 

pentachlorophenol 

0.096 

0.001 

simazine 

0.120 

0.004 

styrene 

0.150 

0.0005 

1,1,2,2-tetrachloroethane 

0.081 

0.001 

tetrachloroethylene 

0.081 

0.001 

toluene 

0.078 

0.001 

2,4,5-TP (silvex) 

0.270 

0.0016 

tribromoacetic acid 

0.042 

0.001 

1,2,4-trichlorobenzene 

0.160 

0.0005 

1,1,1-trichloroethane 

0.084 

0.0046 

1,1,2-trichloroethane 

0.150 

0.0005 

trichloroethylene 

0.180 

0.0010 

trihalomethanes (includes) 
  chloroform (surrogate chemical) 
  bromoform 
  bromodichloromethane 
  chlorodibromomethane 

0.300 

0.015 

xylenes (total) 

0.070 

0.001 

 

For Under Sink Model No. HYDROVIV-US-SRS-18pZIP, Replacement Element HYDROVIV-REP-SRS-18pZIP. For Under Sink Model No. HYDROVIV-US-SRS-43pZIP, Replacement Element HYDROVIV-REP-SRS-43cZIP.  

For Under Sink Model No. HYDROVIV-US-SRS-74pZIP, Replacement Element HYDROVIV-REP-SRS-74pZIP. 

For Under Sink Model No. HYDROVIV-US-SRS-71xZIP, Replacement Element HYDROVIV-REP-SRS-71xZIP. 

These systems have been tested according to NSF/ANSI 42, 53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53. Testing was performed under laboratory conditions. Actual performance may vary. 

NSF/ANSI Standard 

Substance 

Influent Challenge Concentration (mg/L) 

% Required Reduction/Max Permissible Concentration 

NSF/ANSI 42 Aesthetic Effects 

Chlorine Taste and Odor 

2.0 +/- 10% 

50% 

NSF/ANSI 53 Health Effects 

Lead (pH 6.5) 

0.15 +/- 10% 

0.005 mg/L 

NSF/ANSI 53 Health Effects 

Lead (pH 8.5) 

0.15 +/- 10% 

0.005 mg/L 

NSF/ANSI 53 Health Effects 

PFOA/PFOS 

0.0015 +/- 20% 

0.02 ug/L 

 

For Under Sink Model No. HYDROVIV-US-SRS-13xZIP, Replacement Element HYDROVIV-REP-SRS-13xZIP.

For Under Sink Model No. HYDROVIV-US-SRS-48xZIP, Replacement Element HYDROVIV-REP-SRS-48xZIP.

For Under Sink Model No. HYDROVIV-US-SRS-15mZIP, Replacement Element HYDROVIV-REP-SRS-15mZIP.

For Under Sink Model No. HYDROVIV-US-SRS-47mZIP, Replacement Element HYDROVIV-REP-SRS-47mZIP.

For Under Sink Model No. HYDROVIV-US-SRS-76mZIP, Replacement Element HYDROVIV-REP-SRS-76mZIP.

These systems have been tested according to NSF/ANSI 42, 53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53. Testing was performed under laboratory conditions. Actual performance may vary. 

NSF/ANSI Standard 

Substance 

Influent Challenge Concentration (mg/L) 

% Required Reduction/Max Permissible Concentration 

NSF/ANSI 42 Aesthetic Effects 

Chlorine Taste and Odor 

2.0 +/- 10% 

50% 

NSF/ANSI 53 Health Effects 

Lead (pH 6.5) 

0.15 +/- 10% 

0.005 mg/L 

NSF/ANSI 53 Health Effects 

Lead (pH 8.5) 

0.15 +/- 10% 

0.005 mg/L 

 

For Under Sink Model No. HYDROVIV-US-SRS-16nZIP, Replacement Element HYDROVIV-REP-SRS-16nZIP.

For Under Sink Model No. HYDROVIV-US-SRS-49nZIP, Replacement Element HYDROVIV-REP-SRS-49nZIP.

For Under Sink Model No. HYDROVIV-US-SRS-78nZIP, Replacement Element HYDROVIV-REP-SRS-78nZIP.

These systems have been tested according to NSF/ANSI 42, 53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53. Testing was performed under laboratory conditions. Actual performance may vary.

NSF/ANSI Standard

Substance

Influent Challenge Concentration (mg/L)

% Required Reduction/Max Permissible Concentration

NSF/ANSI 42 Aesthetic Effects

Chlorine Taste and Odor

2.0 +/- 10%

50%

NSF/ANSI 53 Health Effects

Lead (pH 6.5)

0.15 +/- 10%

0.005 mg/L

NSF/ANSI 53 Health Effects

Lead (pH 8.5)

0.15 +/- 10%

0.005 mg/L

NSF/ANSI 53 Health Effects

VOC Surrogate Test

0.300 +/- 10%

95%

 


Performance data sheet reduction claims for organic chemicals included by surrogate testing

Substance

Influent challenge concentration (mg/L)

Maximum permissible product water concentration (mg/L)

alachlor

0.050

0.001

atrazine

0.100

0.003

benzene

0.081

0.001

carbofuran

0.190

0.001

carbon tetrachloride

0.078

0.0018

chlorobenzene

0.077

0.001

chloropicrin

0.015

0.0002

2,4-D

0.110

0.0017

dibromochloropropane (DBCP)

0.052

0.00002

o-dichlorobenzene

0.080

0.001

p-dichlorobenzene

0.040

0.001

1,2-dichloroethane

0.088

0.0048

1,1-dichloroethylene

0.083

0.001

cis-1,2-dichloroethylene

0.170

0.0005

trans-1,2-dichloroethylene

0.086

0.001

1,2-dichloropropane

0.080

0.001

cis-1,3-dichloropropylene

0.079

0.001

dinoseb

0.170

0.0002

endrin

0.053

0.00059

ethylbenzene

0.088

0.001

ethylene dibromide (EDB)

0.044

0.00002

haloacetonitriles (HAN)
  bromochloroacetonitrile
  dibromoacetonitrile
  dichloroacetonitrile
  trichloroacetonitrile

0.0005
0.0006
0.0002
0.0003

0.0005
0.0006
0.0002
0.0003

haloketones (HK)
  1,1-dichloro-2-propanone
  1,1,1-trichloro-2-propanone

0.0072
0.0082

0.0001
0.0003

heptachlor

0.025

0.00001

heptachlor epoxide

0.0107

0.0002

hexachlorobutadiene

0.044

0.001

hexachlorocyclopentadiene

0.060

0.000002

lindane

0.055

0.00001

methoxychlor

0.050

0.0001

pentachlorophenol

0.096

0.001

simazine

0.120

0.004

styrene

0.150

0.0005

1,1,2,2-tetrachloroethane

0.081

0.001

tetrachloroethylene

0.081

0.001

toluene

0.078

0.001

2,4,5-TP (silvex)

0.270

0.0016

tribromoacetic acid

0.042

0.001

1,2,4-trichlorobenzene

0.160

0.0005

1,1,1-trichloroethane

0.084

0.0046

1,1,2-trichloroethane

0.150

0.0005

trichloroethylene

0.180

0.0010

trihalomethanes (includes)
  chloroform (surrogate chemical)
  bromoform
  bromodichloromethane
  chlorodibromomethane

0.300

0.015

xylenes (total)

0.070

0.001

 

For general installation, operation, and maintenance requirements, please see installation guide provided with the system. 

Warranty: All Hydroviv products offer a 30-day no-questions-asked satisfaction guarantee (a 1-year warranty is included, which covers defects in materials and workmanship). If for any reason you are not satisfied with your purchase, reach out to our Water Nerds by emailing hello@hydroviv.com or chatting with us at hydroviv.com. 

Hydroviv, LLC | 9399 W Higgins Road | Suite 1100 | Rosemont, IL 60018 | 1-800-676-9312 

Revision Date: September 19th, 2024