Eric Roy, Ph.D.  |  Scientific Founder

Since The Environmental Working Group recently released a report about the prevalence of chromium-6 in drinking water supplies, our email and support line have been filled with questions about the toxic heavy metal. The purpose of this article is to address a lot of these FAQs, including the answer to "what is chromium-6?," and to discuss how to remove chromium 6 from drinking water.

Is Chromium-6 the Same Thing as “Regular” Chromium?

No. So what is chromium-6? Chromium comes in a variety of chemical “flavors.” Most forms of chromium (e.g. chromium metal, trivalent chromium) are not toxic. These are the types of chromium used to make stainless steel and are found in dietary supplements. There is no reason to be throwing away stainless steel cookware!

Chromium-6 (or hexavalent chromium), on the other hand, is an extremely toxic form of chromium, and is known to cause cancer, even at very low concentrations. In popular culture, chromium-6 is the chemical that was at the center of the Erin Brockovich story, which was made into a movie starring Julia Roberts.

Where Does Chromium-6 Come From?

Unfortunately, chemicals containing chromium-6 are useful in a number of industrial processes, which means that chromium-6 can enter drinking water supplies through waste streams that enter rivers and ground water. Industries that generate chromium-6-containing waste include: steel production, leather tanning, textile manufacturing, wood preservation, and electroplating.

How Is Chromium-6 Regulated?

It's not. In 1991 EPA set a Maximum Contaminant Level (MCL) for total chromium (all kinds) in drinking water of 200 parts per billion. The structure of this regulation is flawed because it treats non-toxic forms of chromium in the same manner as highly toxic chromium-6. To put it in perspective, California (which has tighter regulatory conditions that the EPA) has set a proposed limit of 20 parts per trillion for chromium-6, a level that is 10,000 times lower than what the current EPA regulation is for total chromium. Part of the challenge in formulating a proper regulation is that advanced detection procedures and equipment are required to measure things at part per trillion concentrations.

Are the Recent News Articles the Result of a Recent Spike in Chromium-6 Concentrations?

No. There is no sudden rise in chromium-6, the media coverage is just shining light on an existing situation.

What Can I Do To Reduce Exposure To Chromium-6?

Unlike lead, which leaches into water from pipes, chromium-6 comes from the source water itself, so flushing pipes does not reduce concentrations of chromium-6 in drinking water. Boiling water also does not reduce/remove chromium-6.

If you want to remove chromium-6 from your water, you need to filter it using a high end water filter. Filtration pitchers and common fridge filters DO NOT filter chromium-6 from water. A new generation of water filters that use chromium 6 removal media are extremely effective at filtering chromium-6 (and other contaminants) from water. Reverse osmosis is also a viable way to remove chromium 6 from water for people who are willing to accept the drawbacks, including low flow rate. We recently wrote a more in depth article on how to filter chromium 6 from water.

If you have any questions about filtering chromium-6 from your water, we encourage you to take advantage of Hydroviv’s “Help No Matter What” approach to technical support, where we will help you select an effective water filter system, even if it’s not one that we sell. This free service can be reached by emailing support@hydroviv.com

Update April 23, 2017: We have published an article specifically on how to filter chromium 6 from drinking water. See it HERE

Other Articles We Think You'll Enjoy

Eric Roy, Ph.D.   |  Scientific Founder 

Since a nationwide story broke about widespread chromium 6 (also known as hexavalent chromium) contamination impacting about 200 million people in the US, we have been getting a lot of questions about the toxicity, regulation, and removal of the carcinogen from drinking water. This article discusses the only effective ways to remove chromium 6 from drinking water.

There Are Two Effective Ways To Filter Chromium 6 From Water:

1. Cartridges With Chromium 6 Filter Media

Certain types of filtration media are extremely effective at removing chromium 6 from water. They can be blended with other types of filtration media, and built into cartridges that remove chromium 6 as water flows through them. The advantages to this approach over reverse osmosis include: better flow rate, easier to install, and less expensive to maintain. Obviously, we are partial to our under sink water filtration system, but there are other high-end competitors that build quality chromium-6 water filter systems using the same approach successfully (albeit at double the price than Hydroviv).

2. Reverse Osmosis

The other way to effectively filter chromium 6 from drinking water is using a properly maintained reverse osmosis (RO) system. In addition to the common complaints of RO users, it’s critical to diligently replace the pre-filtration cartridges, because if not, the RO membrane can become compromised, rendering the system ineffective. 

Myths About Chromium 6 Removal

Contrary to the words & advice of certain internet naturopathic gurus, boiling, freezing, adding Himalayan sea salt or coconut oil to your water does NOT remove chromium 6 from water, or lessen/reverse the toxic effects of it.   

Other Articles We Think You Will Enjoy

Hydroviv's Science Team   

If you're looking for a water filter for your apartment, condo, or vacation home your options might be limited. However, you shouldn't be forced to settle for ineffective pitcher or fridge filters that don’t remove things like lead, PFAS, or chromium 6. These are the big things to consider when shopping for a water filter for your apartment or rental home.

Universal Connections

You probably don't want to change out the kitchen faucet in a place that you are renting, so you’ll want to make sure that your water filter connects to the existing faucet and cold water valve with universal faucet connections. Nearly all faucets in the US use a 3/8” compression fitting to connect to the cold-water shutoff valve, so make sure that the inlet and outlets use that size connection.

Size

Many apartments and condos in cities like New York City or Washington, D.C. have smaller under sink spaces than what are found in larger homes. When you are shopping for water filters, you’ll need to take size into account, especially if your unit has a garbage disposal that takes up a bunch of space under your sink. Most reverse osmosis systems are bulky and have large storage tanks, and will not fit under the sink of many apartments. 

Deposit Considerations

Many water filtration systems for apartments require that you drill a hole in your drain line, or that you drill a hole in your counter top. Obviously, if you do either of those things, you won’t get your deposit back, so most people don’t opt for reverse osmosis systems that require a drilled connection to your drain. It can also be difficult to get a plumber to a more remote location if you're looking to install a Reverse Osmosis filter in a second home. 

Portability

When you rent your home, you want to make sure that your water filter can be taken with you when it’s time to move. Make sure that your apartment water filter un-installs very easily, so you don’t leave it behind in the frantic move out!

Hydroviv’s custom water filters are engineered with renters in mind. Its housing fits in small spaces and connects to existing faucets with screw on, screw off connections in 15 minutes, no plumbing experience needed, and we provide an easy water filter installation guide to help you along the way. When it’s time to move or close up camp for the season, Hydroviv water filters can be pulled in about 5 minutes, and the unit’s plumbing can be put back to how it was when you got there.