Water Quality InformationWritten By Actual Experts

Analies Dyjak  |  Policy Nerd
Updated July 26, 2019 to include current data

For Hydroviv’s assessment of the city of Cleveland's drinking water issues, we aggregated water quality test data from Cleveland Water, U.S. Environmental Protection Agency and supplemental health information. We cross referenced the city’s water quality test data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Cleveland’s drinking water

Where Does Cleveland Source its Drinking Water?

Cleveland sources its drinking water from four intake locations in Lake Erie’s Central Basin. Water is collected 3-5 miles offshore, where it is believed to be cleaner than surrounding shore locations. Cleveland Water treats and delivers 300 million gallons of water to residents throughout the city. 

Chromium 6 In Cleveland's Drinking Water 

Chromium 6 is a highly toxic metal that is currently unregulated by the EPA. Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. In recent years, Chromium 6 concentrations were as high as 103 parts per trillion, which is over the former California Health Goal of 20 parts per trillion. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress are health effects associated with high levels of chromium 6 exposure.

Lead In Cleveland's Drinking Water 

Lead is also of concern in Cleveland, Ohio. The 90th percentile in Cleveland drinking water is currently 1.84 parts per billion. That being said, the water utility only sampled 55 sites. The extremely small sample population is not representative of the actual scope of the lead problem in Cleveland. Lead enters tap water through old lead service pipes and lead-containing plumbing. Treated water leaving the plant may be in compliance with loose EPA standards, but could become contaminated once it enters older infrastructure. Houses built before 1986 were most likely built with lead plumbing and lead fixtures. Environmental Protection Agency, Center for Disease Control, and American Academy of Pediatrics all recognize that there is no safe level of lead for children between the ages of 0-5. Lead exposure can cause developmental issues, lowered IQ, and damages to the kidneys and brain. Any threshold of lead concentration is not safe for infants and young children. Health organizations have noted that any concentrations of lead when ingested by adults could cause adverse health effects.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Cleveland’s water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Other Articles We Think You Might Enjoy:
5 Things To Know About Chromium 6 In Drinking Water
Lead In Drinking Water
Chloramine In Drinking Water

Analies Dyjak, M.A.  |  Policy Nerd
Updated August 2, 2019 to include current data

For Hydroviv’s assessment of Portland, Oregon drinking water quality, our Water Nerds collected test data from the Portland Water Bureau, the U.S. Environmental Protection Agency, and other available data. We cross referenced these data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Portland’s drinking water.

Where Does Portland, Oregon Source Its Drinking Water?

Portland sources its drinking water from the Bull Run River which is located in Mt. Hood National Forest. Portland also draws drinking water from the Columbia South Shore Well Field, which is made up of 26 groundwater wells. The wells draw water from three different aquifers located on the perimeter of the Columbia River.

Lead In Portland’s Drinking Water

Lead contamination is by far of biggest concern in Portland, Oregon drinking water. Not only are the city wide lead levels among the highest in the country, lead contamination has been getting worse in recent years. According to the most recent data, the 90th percentile for lead in Portland drinking water is 11.9 parts per billion. This is just under the outdated Federal Action Level of 15 parts per billion. In recent years, the 90th percentile in Portland has exceeded the Federal Action Level. Additionally, to put things in perspective, EPA, CDC, and American Academy of Pediatrics all recognize that there is no safe level of lead for children.

The goal of annual Consumer Confidence Reports is to be as transparent as possible so that residents can be informed about problems with their drinking water. Unfortunately, Portland’s report was written in a way that leaves consumers confused when it comes to lead. When reading through the report, lead levels for the treated source water are displayed prominently. Of course, these lead levels are very low, because lead contaminates water as it flows through lead containing pipes found in the distribution system and the home’s plumbing. The relevant data for samples collected at the tap are buried in a small table on the next to last page, separate from the other contaminants.

Disinfection Byproducts In Portland’s Drinking Water

Portland’s municipal water also had high concentrations of Disinfection Byproducts or DBPs. Concentrations were detected as high as 44.5 parts per billion, and averaged 37.7 parts per billion for Total Trihalomethanes (TTHMs). Haloacetic Acids-5 (HAA5) concentrations were as high as 51.2 parts per billion and averaged 37.7 parts per billion. For a bit of perspective, EPA's Maximum Contaminant Level for TTHMs is 80 parts per billion and 60 parts per billion for HAA5. While Portland's water quality chemical concentrations are technically in compliance, these levels are definitely high. Disinfection Byproducts are a category of emerging contaminants which means they have been detected in drinking water but the risk to human health is unknown. DBPs are formed when chlorine-based disinfectants are routinely added to the water supply to kill bacteria. EPA has stated that they have been linked to an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. Some disinfection byproducts have almost no toxicity, but others have been associated with cancer, reproductive problems, and developmental issues in laboratory animals. 

Chloramine In Portland’s Drinking Water

While most municipalities use chlorine as the primary drinking water disinfectant, Portland’s drinking water is disinfected with chloramine. Chloramine is primarily responsible for what many customers report as the “bad taste” or “pool smell” of tap water. Unlike chlorine, chloramine does not dissipate if a container of water is left in the refrigerator overnight. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Portland's water problems use a special filtration media that is purposefully designed to remove chloramine.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Portland’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Other Articles We Think You Might Enjoy:
Lead Contamination In Drinking Water
Disinfection Byproducts In Drinking Water: What You Need To Know
Chlorine Vs. Chloramine: What You Need To Know

*Updated May 19, 2020 to include current data*

Analies Dyjak  |  Policy Nerd

For Hydroviv’s assessment of Providence, Rhode Island’s drinking water, we collected water quality test data from Providence Water and the U.S. Environmental Protection Agency. We cross referenced the city’s water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Providence drinking water.

Lead In Providence’s Drinking Water

Providence, Rhode Island has been in exceedance of the federal lead Action Level since 2005. The water quality report released in 2020 found that lead levels in Providence are currently 18 parts per billion, and 38/295 samples tested exceeded the EPA Action level of 15 ppb.  Lead enters tap water through old lead service pipes and lead-containing plumbing. Environmental Protection Agency, Center for Disease Control, and American Academy of Pediatrics all recognize that there is no safe level of lead for children. The data provided by the city may not be representative of the actual scope of the lead problem in Providence, RI because only 295 homes were tested for lead. Hydroviv strongly encourages Providence residents to take advantage of the city’s free lead testing program. Under this program, residents can pick up a free kit to test for lead in their drinking water at the Providence Water customer service location. For more information call 401-521-6303.

Year	90th Percentile Lead 2nd Period (parts per billion/ppb)	EPA Maximum Contaminant Level Goal (parts per billion/ppb)
2006	23 ppb	0 ppb
2007	21 ppb	0 ppb
2008	21 ppb	0 ppb
2009	30 ppb	0 ppb
2010	20 ppb	0 ppb
2011	21 ppb	0 ppb
2012	25 ppb	0 ppb
2013	30 ppb	0 ppb
2014	16 ppb	0 ppb
2015	15 ppb	0 ppb
2016	16 ppb	0 ppb
2017	17 ppb	0 ppb
2018	22 ppb	0 ppb
2019	16 ppb	0 ppb

Disinfection Byproducts In Providence's Water

Providence Water also has elevated levels of Disinfection Byproducts or DBPs. EPA regulates two categories of DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids-5 (HAA5). The average concentration of TTHMs was 71.8 parts per billion which is just under EPA's standard of 80 parts per billion for drinking water. DBPs are a category of emerging contaminants which means they have been detected in drinking water but the risk to human health is unknown. DBPs are formed when when chlorine based disinfectants are routinely added to the water supply to kill bacteria. Regulatory agencies have very little knowledge about the adverse health effects of DBPs and their toxicity. EPA has stated that they have been linked to an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. Some disinfection byproducts have almost no toxicity, but others have been associated with cancer, reproductive problems, and developmental issues in laboratory animals. 200 million people in the United States use chlorinated tap water as their primary drinking source, so we take understanding their full health effects very seriously, even if federal agencies fail to regulate all categories.

Per and Polyfluoroalkyl Substance (PFAS) In Providence Drinking Water

PFAS are a category of emerging contaminants that have been detected in a growing number of water supplies across the United States. PFAS have been associated with an increased risk of cancer, an increased risk of miscarriages, and other adverse health effects. PFAS have been detected in water supplies throughout the state of Rhode Island. Because they are not regulated, cities like Providence are not required to test, monitor, or remove them from drinking water.Not all water filters are able to remove PFAS from tap water.

Where Does Providence Source Its Drinking Water?

Providence sources its drinking water from the Scituate Reservoir, which is located 15 miles east of the city. The Scituate Reservoir has tributaries that flow in and out of several other reservoirs including the Regulating, Barden, Ponaganset, Westconnaug, and Moswansicut reservoirs. The Providence Water system has approximately 1,040 miles of transmission and distribution mains.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Providence’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Other Articles We Think You Might Enjoy:
Lead In Drinking Water
Disinfection Byproducts: What You Need To Know
Chloramine In Drinking Water

Emma Schultz, M.S.  |  Scientific Contributor

There has recently been a spate of schools testing positive for lead contamination in drinking water across the country, at dangerously high levels. Since the Flint, Michigan water crisis brought lead contamination and lead poisoning into the spotlight in 2015, there has been a push to increase water testing in schools - and rightly so. It’s not likely that high test results are new; it is unfortunately instead likely that this has been an ongoing undetected problem. EPA estimates that 90,000 public schools, as well as half a million child care facilities, are not regulated under the Safe Drinking Water Act due to utilizing a municipal water utility. While these statistics are dated (2002), they are still referenced by EPA. Since the utility is the responsible party for testing water, the school itself is not required to test, unless there are more stringent local laws or they voluntarily choose to do so. Most do not, or if they do, their results may not be reflective of normal lead levels. Water frequently stagnates in school pipes, due to nights, weekends, and summers where water usage is drastically diminished. That stagnation leads to leaching of lead in the school's water, and therefore lead accumulation, when there are lead pipes or lead-containing valves and fittings.

It is important to note that there is no such thing as a safe level of lead in drinking water. It bears repeating: no level of lead is safe, especially when it comes to children, who are most sensitive to lead poisoning. The EPA limit of 15 parts per billion, set in 1991, is much higher than EPA and CDC have admitted is safe (they agree, there is no safe level of lead). In addition, 10% of samples are legally allowed to exceed the 15 ppb threshold without resulting in any utility violations. In contrast, The American Academy of Pediatrics proposes that lead in school drinking water should not exceed 1 ppb.

Lead Contamination In Nashville, Tennessee Schools

One city that recently made headlines for lead contamination in public schools is Nashville, Tennessee. Schools were tested for lead during the summer of 2017. Examples of frighteningly high lead levels are as follows (note, these are individual tap results):

• Park Avenue Elementary: 170 ppb
• Spectrum Academy: 349 ppb
• Chadwell Elementary: 272 ppb
• Cole Elementary: 106 ppb
• Neelys Bend Elementary: 115 ppb

In addition, 11 fountains exceeded 5 ppb of lead at McMurray Middle’s annex, and 13 fountains at Hattie Cotton Elementary had greater than 5 ppb. Haywood Elementary had very high lead averages, with 26 drinking fountains testing greater than 5 ppb of lead, 9 of which were over 15 ppb.

Metro Nashville Public Schools (MNPS) reported that any tap showing lead levels above 15 ppb was subsequently disconnected, but shutting off one tap does not solve the problem. Public schools are often old, and old schools tend to have an old infrastructure, which includes lead-based plumbing. While MNPS does not state the age of their school buildings, several of the schools also made headlines this winter for being unable to heat their classrooms during a prolonged cold spell, with classroom temperatures dipping down to a frigid 46°. This aging infrastructure is putting students at risk in multiple way. Regarding lead in drinking water, MNPS has remained in the news because of a leaked recording where Executive Director of Facilities Dennis Neal plotted with staff to bypass the filtration systems on several dozen lead-filtering “filtration stations” that were installed in some of the more affluent schools (courtesy of parent donations) following the lead scare. Neal was concerned about the high cost of continuously filtering water across schools with high lead levels, and stated “People keep wanting these bottle fillers, but they are adamant about them being filtered. I’m saying we cannot support it.”

After the recording was leaked, Neal was put on administrative leave while MNPS investigated; he has since resigned. Issues remain with lead levels in schools though, and parents have every right to be concerned. MNPS District Spokesperson Michelle Michaud, in an interview with CBS This Morning, stated that filters aren’t actually needed, because the school district has reduced lead levels to under 15 ppb, and then claimed that filters can reduce the amount of lead in water no further than that. "Those filters are doing a good thing," Michaud said. "They are making the water taste better, but they are not filtering out more lead." This is in contrast to the fact sheet from one of their filtration providers, which states that lead levels will be reduced to 10 ppb or less. Hydroviv filters, in comparison, have treated water with 200 ppb of lead, reducing the lead in water to an output of 0 ppb.

Other Articles We Think You'll Enjoy

Water quality data for residences in Nashville, TN
Why are so many schools testing positive for lead?
How does lead enter tap water?

Hydroviv's Science Team

Our tech support team gets a lot of questions from people looking to purify their water by boiling or freezing it. Doing a quick web search, we learned that there is A LOT of bad information out there on the topic.

Will Boiling Or Freezing My Water Remove Lead, Arsenic, Mercury, PFAS, & Chromium 6?

No! Unfortunately, freezing or boiling water to purify it does not remove chemicals like lead, arsenic, mercury, chromium 6, PFAS, or barium. The only way to remove these chemicals is by using a quality water filtration system. If you'd like to find water filters that remove harmful contaminants from tap water, check out this Duke University/NC State water filter study. We have our favorite NSF/ANSI certified custom water filter, but there are other effective systems out there as well!

What Does Boiling My Water Protect Against?

In the United States, we are very fortunate that modern disinfection practices have nearly eliminated widespread waterborne illness. However, sometimes unplanned things do happen (e.g. water main breaks) which opens up an opportunity for biological contamination. When this happens, municipalities may issue a boil order or notice, because boiling water kills potentially dangerous microorganisms.

In the event your water company issues a boil water advisory, the CDC provides specific advice on what you should do. Their guidance covers many different types of water uses, and specifically advises you to boil the water you use for drinking and preparing food. They also advise that you use bottled or boiled water for brushing your teeth, and when giving water to pets. 

What Does Freezing My Water Protect Against?

Freezing things slows down the growth of bacteria, and is the reason why frozen foods can be stored for long periods of time.

Other Articles We Think You'll Enjoy

Things To Consider Before Buying A Reverse Osmosis System
5 Things To Know About Chromium 6 In Drinking Water
Why TDS Meters Don't Tell You Anything About Lead