Christina Liu, B.S. | Hydroviv Science Team

Tampa Bay Water is an alliance between the six governments in west-central Florida: Hillsborough County, Pasco County, Pinellas County, New Port Richey, St. Petersburg and Tampa. These municipalities, in turn, provide drinking water to more than 2.5 million people in the Tampa Bay region. For Hydroviv’s assessment of Tampa Bay Region’s drinking water, we aggregated water quality test data from Tampa Bay Water, the 6 municipal suppliers listed above, the U.S. Environmental Protection Agency (EPA), the Environmental Working Group, and the US Geological Survey. Our Water Nerds then cross referenced these data with toxicity studies in the scientific and medical literature, as well as upcoming regulatory changes. The custom water filters that we build for our customers in the Tampa Bay Region are optimized with this research in mind.

Source of the Tampa Bay Region’s Drinking Water

Tampa Bay Water’s supply is a blend of treated groundwater, river water and desalinated seawater. Groundwater comes from 12 wellfields pumping water from the Floridan Aquifer. River water is withdrawn from the Alafia River, Hillsborough River and the Tampa Bypass Canal. Surplus river and canal water is stored in the C.W. Bill Young Regional Reservoir, which supplies the surface water treatment plant during dry times. Hillsborough Bay is the source of seawater for the Tampa Bay Seawater Desalination Plant.

What Are The Major Concerns in Tampa Bay Drinking Water?

Contaminants of concern in the Tampa Bay Region’s drinking water include Lead, PFAS, Disinfection Byproducts, Radium, and Uranium. Low amounts of Arsenic and Chromium 6 were also detected in the water. Chloramine is used to disinfect the water.

Lead In Tampa Bay Region’s Drinking Water

Lead enters into the consumer's tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (as witnessed in Flint, Michigan), lead leaches into the drinking water, reaching toxic levels. 2020 lead sampling by Tampa Bay Water detected levels as high as 4 parts per billion. EPA, CDC and the American Academy of Pediatrics all recognize that there is no safe level of lead for children. In addition, Federal regulations cannot take into account levels measured at an individual tap.

PFAS or 'Forever Chemicals' in Tampa Bay Water

Per and Polyfluoroalkyl Substances (PFAS) are a category of emerging contaminants commonly used in firefighting foam, Teflon, non-stick surfaces, stain-resistant surfaces, and food packaging. The Agency for Toxic Substances and Disease Registry (ATSDR) has determined that PFAS exposure is associated with various adverse health effects, including an increased risk of cancer, lowered fertility rates, and developmental issues in infants and young children. A new study out of The Yale School of Public Health recently found that exposure to PFAS increases the risk of miscarriage by 80-120% in pregnant women. The Centers for Disease Control also issued a disclosure regarding a potential intersection between PFAS and COVID-19.

Even small amounts of PFAS are extremely toxic. PFAS are measured in parts per trillion, and one part per trillion is equivalent to one drop of water in 20 Olympic-sized swimming pools.

PFAS have been detected in a growing number of municipalities across the United States. Most municipalities are not required to test for or remove PFAS from drinking water, including the Tampa Bay Region. Not all water filters are designed to remove PFAS from tap water. If you'd like to find water filters that remove PFAS from tap water, check out this Duke/NC State PFAS study.  Hydroviv filters are NSF/ANSI Standard 53 certified for PFOA/PFOS removal.

Disinfection Byproducts (DBPs) In Tampa Bay Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants (added to the water supply to protect consumers) react with naturally-occurring organic matter. EPA regulates two categories of DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids (HAA5). The EPA has stated that DBPs have been associated with increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. Haloacetic Acid levels in Hillsborough and Pinellas County ranged as high as 47.2 parts per billion, nearing the EPA Maximum Contaminant Level of 60 parts per billion.  Total Trihalomethane levels ranged as high as 107 parts per billion, exceeding the EPA Maximum Contaminant Level of 80 parts per billion.

Radium and Uranium in Tampa Bay Region’s Drinking Water

Radium is formed when uranium and thorium undergo radioactive decay in the environment. Two of the main radium isotopes found in the environment are radium-226 and radium-228. Radium in drinking water is of primary concern because this radiation may cause cancer, kidney damage and birth defects.  Radium levels in Hillsborough County were as high as 2.04 ppb with the EPA Maximum Contaminant Level Goal 5 ppb. Uranium levels in Pasco County water measured at 0.54 ppb in 2019, with the EPA Maximum Contaminant Level Goal set at 30 ppb.

Use Of Chloramine In Tampa Bay Region’s Tap Water

While most cities use chlorine as the primary disinfectant, all of the municipalities within Tampa Bay Water use chloramine, which is made by combining chlorine and ammonia. Chloramine is frequently the issue when customers report a “bad taste” in their tap water, and unlike chlorine will not fade away if left in the fridge overnight. The 2020 chloramine running annual average for the City of Tampa Bay was 3.5 parts per million, with samples ranging as high as 5.3 ppm; the maximum residual disinfectant level, in comparison, is only 4.0 ppm. Most one-size-fits-all water filters use filtration media that don’t adequately remove chloramine, but the filters that Hydroviv builds for Tampa Bay Area water use special filtration media that are purpose-built to remove chloramine as well.

Arsenic in Tampa Bay Region’s Drinking Water

Arsenic is a hazardous heavy metal that can cause cancer and other health problems. Arsenic originates in source water naturally. In the Tampa Bay Water region, low amounts of arsenic were detected in the different areas, ranging from 0.11 ppb to 0.43 ppb. While Tampa Bay Region’s Arsenic levels were comparatively low when measured to EPA water quality standards, consumers should know that the U.S. EPA's standard balances toxicity against the costs of removing arsenic from drinking water. 

Chromium 6 Levels In Tampa Bay Region’s Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. Tampa Bay Water was measured to have Chromium 6 levels ranging from 47 parts per trillion to 140 parts per trillion. California has determined that 20 parts per trillion is the contaminant level below which there is minimal health risk. The Chromium 6 levels in the Tampa Bay water system range from about 2 to 7 times the level generally accepted as safe.

How Can Hydroviv Help Me?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Tampa Bay Area water, but all of our filters also include broad protection against a wide range of contaminants.

If you’re interested in learning more about water filters that have been optimized for Tampa Bay tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We post water-related news on Twitter, Instagram, and Facebook. 

Hydroviv's drinking water filters carry NSF certifications to Standard 42 (aesthetic effects--Chlorine Removal) and Standard 53 (health effects--Lead, VOCs, and PFOA/PFOS removal), and are independently tested to remove hundreds of contaminants.

Recommended Articles For You:
Everything You Need To Know About PFAS Contamination in Tap Water
Disinfection Byproducts In Your Drinking Water
Problems We Found With Orlando Drinking Water

Christina Liu, B.S. | Hydroviv's Science Team

For Hydroviv’s assessment of East Bay MUD’s drinking water, we aggregated water quality test data from EBMUD, the U.S. Environmental Protection Agency (EPA), the Environmental Working Group, and the US Geological Survey. Our Water Nerds then cross referenced these data with toxicity studies in the scientific and medical literature, as well as upcoming regulatory changes. The custom water filters that we build for our customers in the East Bay Region of California are optimized with this research in mind.

Who Gets Drinking Water From The East Bay Municipal Utility District?

The East Bay Municipal Utility District (EBMUD) serves 1.4 Million customers in the East Bay Region of San Fransisco, California, including the cities of Crockett, Rodeo, Hercules, Pinole, El Sobrante, San Pablo, Richmond, El Cerrito, Kensington, Orinda, Moraga, Piedmont, Oakland, Alameda, San Leandro, San Lorenzo, Castro Valley,  Hayward,  Albany,  Berkeley,  Emeryville, Lafayette, Pleasant Hill, Walnut Creek, Alamo, Danville, and San Ramon.   

Source Water for EBMUD

The 577-square mile Mokelumne River watershed on the western slope of the Sierra Nevada is the major source of the water used by the East Bay customers. Snowmelt from Alpine, Amador, and Calaveras counties flows into Pardee Reservoir near Valley Springs. Three large aqueducts transport water 90 miles from Pardee Reservoir into EBMUD’s water distribution system. 

Lead In East Bay’s Drinking Water

Lead enters into the consumer's tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (as witnessed in Flint, Michigan), lead leaches into the drinking water, reaching toxic levels. EBMUD conducted lead sampling of schools in their service area between 2017 and 2020. EBMUD reported results of less than 5 ppb in 95 percent of the samples and less than 1 ppb in 77 percent of the samples. Please bear in mind that EPA, CDC and the American Academy of Pediatrics all recognize that there is no safe level of lead for children. In addition, Federal regulations also cannot take into account levels measured at an individual tap.

PFAS in East Bay’s Drinking Water

Per and Polyfluoroalkyl Substances (PFAS) are a category of emerging contaminants commonly used in firefighting foam, Teflon, non-stick surfaces, stain-resistant surfaces, and food packaging. The Agency for Toxic Substances and Disease Registry (ATSDR) has determined that PFAS exposure is associated with various adverse health effects, including an increased risk of cancer, lowered fertility rates, and developmental issues in infants and young children. A new study out of The Yale School of Public Health recently found that exposure to PFAS increases the risk of miscarriage by 80-120% in pregnant women. The Centers for Disease Control also issued a disclosure regarding a potential intersection between PFAS and COVID-19.

Even small amounts of PFAS are extremely toxic. PFAS are measured in parts per trillion, and one part per trillion is equivalent to one drop of water in 20 Olympic-sized swimming pools.

PFAS have been detected in a growing number of municipalities across the United States. Several years ago, the USEPA required large water systems (including EBMUD) to collect and analyze samples for a limited set of PFAS, and the CA State Water Board has issued monitoring orders to hundreds of water systems most vulnerable to PFAS contamination due to their proximity to airports with fire training and response areas and municipal solid waste landfills. While EBMUD was not required to monitor due to the protected nature of their watersheds, but they performed a voluntary collection and analyzed samples from their treatment plants during 2020.  Low levels were detected in the water -- 5.1 parts per trillion for PFOA and 6.5 parts per trillion for PFOS.  Not all water filters are designed to remove PFAS from tap water. If you'd like to find water filters that remove PFAS from tap water, check out this Duke/NC State PFAS study.  Hydroviv filters are NSF/ANSI Standard 53 certified for PFOA/PFOS removal.

Disinfection Byproducts (DBPs) In East Bay’s Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants (added to the water supply to protect consumers) react with naturally-occurring organic matter. EPA regulates two categories of DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids (HAA5). The EPA has stated that DBPs have been associated with increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. Haloacetic Acid levels in ranged as high as 51 parts per billion, nearing the EPA Maximum Contaminant Level of 60 parts per billion.  Total Trihalomethane levels ranged as high as 57 parts per billion, as compared to the EPA Maximum Contaminant Level of 80 parts per billion.

Chromium 6 Levels In East Bay’s Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. EBMUD was measured to have Chromium 6 levels measuring as high as 220 parts per trillion.  California has determined that 20 parts per trillion is the contaminant level below which there is minimal health risk.  The Chromium 6 levels in East Bay’s Water were as high as 11 times the level generally accepted as safe.

Use Of Chloramine In East Bay’s Tap Water

While most cities use chlorine as the primary disinfectant, all of the municipalities within EBMUD use chloramine, which is made by combining chlorine and ammonia. Chloramine is frequently the issue when customers report a “bad taste” in their tap water, and unlike chlorine will not fade away if left in the fridge overnight. The 2020 chloramine running annual average for EBMUD was 2.4 parts per million, with samples ranging as high as 4 ppm, which is the maximum residual disinfectant level. Most one-size-fits-all water filters use filtration media that don’t adequately remove chloramine, but the filters that Hydroviv builds for water provided by EBMUD use special filtration media that are purpose-built to remove chloramine as well.

How Can Hydroviv Help Me?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for East Bay’s water, but all of our filters also include broad protection against a wide range of contaminants.

If you’re interested in learning more about water filters that have been optimized for East Bay tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We post water-related news on Twitter, Instagram, and Facebook. 

Hydroviv's drinking water filters carry NSF certifications to Standard 42 (aesthetic effects--Chlorine Removal) and Standard 53 (health effects--Lead, VOCs, and PFOA/PFOS removal), and are independently tested to remove hundreds of contaminants. Please Share This East Bay Water Quality Article With Anyone You Think Would Benefit From The Information!

Recommended Articles For You
Everything You Need To Know About PFAS Contamination in Tap Water
Disinfection Byproducts In Your Drinking Water
5 Things to Know about Chromium-6 in Drinking Water
Problems We Found in San Francisco, California Drinking Water

Eric Roy, Ph.D.  |  Scientific Founder

We get a lot of questions about lead service lines and how to tell if you have lead pipes, and we thought that it would be worth putting together an article that talks about some of the lesser known places where lead can exist in residential plumbing. Most people are surprised to learn that up until 2014, EPA allowed lead exist in fixtures & valves used for drinking water lines!

The Evolution of “Lead Free” Plumbing

When the Safe Drinking Water Act (SDWA) was amended in 1986, it mandated that residential plumbing could not use any pipe, pipe fitting, solder, flux, or fixture that was not “lead free.” While the term “lead free” seems pretty straightforward, the law allowed for the definition of "lead free" to evolve. The chart below shows allowable lead levels in solder, pipes, fittings, and fixtures through the 25+ years that lead was phased out of plumbing. It's worth pointing out that, it wasn’t until very recently (2014) that all pipes/fittings/fixtures used for drinkable water were required to contain negligible amounts of lead.

Maximum Levels of Lead Allowed in Residential Plumbing 

Note: Things like toilets, urinals, bidets, tub fillers, shower valves are excluded from these regulations 

How to Determine If Plumbing in Your Home Is Lead Free

Solder: Unfortunately, there is no easy way to visually tell how much lead is in soldered joints after the connection is made. If you are getting plumbing work done, it's ok to ask your plumber to see the package for the solder that they are using. It should prominently say “lead free” on it.

What To Do If Your Home Has Lead Plumbing

As the US has become increasingly aware of lead contamination in drinking water because of the ongoing crisis in Flint, recent violations in large cities like Pittsburgh, and longstanding lead problems in old cities like Chicago and New York City, more and more people are asking what they can do to minimize their family's exposure to lead.

The best way, bar none is to:

• Use a high quality filter at each faucet used for drinking. Any filter should meet or exceed NSF Standard 53 for lead filtration performance.

If you are unable to use a rated filter, or if the filter you use does not protect against lead (like most pitchers and fridge filters), you can take the following steps to minimize exposure:

• Allow your faucet to run for at least 2 minutes before collecting water for consumption (drinking/cooking/washing food). Doing so allows the water sitting in the pipes to flush out and be replaced by fresh water flowing through the large mains.
• Only use the faucet at a slow flow rate when collecting water for consumption. Doing so minimizes the amount of lead particulates that can be swept into the stream and carried to the faucet.

As always, we encourage everyone to take advantage of Hydroviv's "Help No Matter What" technical support policy, where we answer questions related to drinking water and water filtration, even if you have no desire to purchase our products. Drop us a line about lead pipes in homes at support@hydroviv.com, or use our live chat function.

Related Articles:
Does New York City Tap Water Expose More People To Lead Than Flint?
Pittsburgh's Lead Level Exceeds EPA Limits In 2016
Why You Are Being Mislead By Your TDS Meter