Water Quality InformationWritten By Actual Experts

Ernesto Esquivel  |  Water Nerd

For Hydroviv’s assessment of Columbus drinking water, we collected water quality test data from the city’s Consumer Confidence Report and the U.S. Environmental Protection Agency. We cross referenced Columbus water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Columbus drinking water.

Where Does Columbus Source Its Drinking Water?

Columbus sources its drinking water from the Scioto River, Big Walnut Creek, and groundwater from the Scioto River Valley. The city is serviced by three water treatment plants that each take care of a certain area of the city. The three plants are the Dublin Road treatment plant (DRWP), the Hap Cremean Water Plant (HCWP), and the Parsons Avenue Water Plant (PAWP).

Chromium 6 In Columbus Drinking Water

Chromium 6 is a highly toxic metal that is currently unregulated by the EPA. In recent years, Columbus city water has had a problem with this dangerous contaminant. Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. In this years water quality report, concentrations of Chromium 6 were detected as high as 0.35 parts per billion in certain groundwater sources. These levels are 17 times higher than the concentration determined to have a negligible impact on cancer risk. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Ingestion of extremely high doses of chromium 6 compounds can cause acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress which may result in death.

Disinfection Byproducts In Columbus Drinking Water

Columbus city water problems also includes high concentrations of disinfection byproducts or DBPs. DBPs are formed when chlorine-based disinfectants react with organic matter. They are split into two categories: Total Trihalomethanes (TTHMs) and Haloacetic Acids-5 (HAA5). Concentrations of HAA5 averaged 29.4 parts per billion at DRWP, 45.3 parts per billion at HCWP, and 8.4 parts per billion at PAWP. Concentrations of TTHMs averaged 40.2 parts per billion at DRWP, 53 parts per billion at HCWP, and 34.1 parts per billion in PAWP. For a bit of perspective, EPA’s Maximum Contaminant Level for HAA5 is 60 parts per billion and 80 parts per billion for TTHMs. Disinfection Byproducts are a category of emerging contaminants which means they have been detected in drinking water but the risk to human health is unknown. Regulatory agencies have very little knowledge about the adverse health effects of DBPs, and their toxicity. EPA has stated that they have been linked to an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Columbus tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.



Analies Dyjak  |  Policy Nerd

For Hydroviv’s assessment of the city of Milwaukee, Wisconsin’s drinking water, we collected water quality test data from the city and the U.S. Environmental Protection Agency. We cross referenced their water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Milwaukee’s drinking water.

Where Does Milwaukee Source Its Drinking Water?

Milwaukee sources its drinking water from Lake Michigan. Lake Michigan has had a long history of pollution, including a recent lawsuit involving Chromium 6 releases from an abutting steel facility.

Chromium 6 In Milwaukee’s Drinking Water

Chromium 6 is a highly toxic metal that is currently unregulated by the EPA. In recent years, the city of Milwaukee's water has had a major problem with this dangerous contaminant. Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. This years water quality report for Milwaukee found levels of Chromium 6 as high as 0.25 parts per billion. These levels are 12.5 times higher than the concentration determined to have a negligible impact on cancer risk. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Ingestion of extremely high doses of chromium 6 compounds can cause acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress which may result in death.

Lead In Milwaukee's Drinking Water 

In recent years, the city of Milwaukee has also had a problem with lead in drinking water. Lead enters Milwaukee's tap water through old lead service pipes and lead-containing plumbing. 10% of sites that were tested for lead had concentrations over 7.2 parts per billion. The highest concentration detected in 2017 was 130 parts per billion, which is a whopping 8.6 times higher that the Federal Action Level of 15 parts per billion. Environmental Protection Agency, Center for Disease Control and American Academy of Pediatrics all recognize that there is no safe level of lead for children. These health and regulatory organizations are trying to reduce the allowable limit, so a concentration of 130 parts per billion is of serious concern. Treated water leaving the plant may be in compliance with loose EPA standards, but could become contaminated once it enters older infrastructure. Houses built before 1986 were most likely built with lead plumbing and lead fixtures. Lead exposure can cause developmental issues, lowered IQ, and damages to the kidneys and brain.

Perfluorinated Compounds In Milwaukee's Drinking Water

This years water quality report for Milwaukee included test data from six Perfluorinated Compounds (PFCs). Perfluorinated Compounds are associated with firefighting foam, non-stick cookware, Scotchguard and other solvents from manufacturing. The two PFCs that are the most well known and the most researched are Perfluorooctanoic acid (PFOA) which was detected at 2.1 parts per trillion and Perfluorooctane-sulfonic acid (PFOS) which was detected at 2 parts per trillion. The Agency for Toxic Substances and Disease Registry recently recommended setting a Minimum Risk Level of 20 parts per trillion for both of these substances. These data are preliminary and the effects to human health are still unknown. This category of chemicals are “emerging contaminants” which means they are thought to pose a potential threat to human health and the environment, but haven't yet been regulated. Perfluorinated Compounds contribute to environmental contamination largely due to the fact that they are highly resistant to degradation processes, and thus persist for many years in water, air and can enter the food chain via bioaccumulation in certain animal species.

Chloramine In Milwaukee’s Drinking Water

While most municipalities use chlorine as the primary drinking water disinfectant, Milwaukee’s drinking and tap water is disinfected with chloramine. Chloramine is primarily responsible for what many customers report as the “bad taste” or “pool smell” of tap water. Unlike chlorine, chloramine does not dissipate if a container of water is left in the refrigerator overnight. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Milwaukee use a special filtration media that is purposefully designed to remove chloramine.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for the city of Milwaukee’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Ernesto Esquivel  |  Water Nerd
**Updated August 2, 2019 to include current data

For Hydroviv’s assessment of Louisville, Kentucky’s tap and drinking water problems, we collected water quality test data from Louisville and the U.S. Environmental Protection Agency. We cross referenced Louisville water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Louisville’s drinking water.

Where Does Louisville Source Its Drinking Water?

Louisville sources its drinking water from the Ohio River. The utility provider, Louisville Water, treats and distributes drinking water to the metropolitan area as well as surrounding counties, including; Bullitt, Hardin, Nelson, Oldham, Shelby, and Spencer.

Lead In Louisville’s Drinking Water

Lead enters tap water through old lead service pipes and lead-containing plumbing. 10% of sites that were tested for lead had concentrations over 4.7 parts per billion, and the highest level collected was 10.2 parts per billion. The City of Louisville only received data from 50 residential taps, so the small data set may not be representative of the actual scope of the lead problem. Environmental Protection Agency, Center for Disease Control and American Academy of Pediatrics all recognize that there is no safe level of lead for children. Additionally, once water hits lead plumbing and lead fixtures, these measurements will increase significantly. Houses built before 1986 were most likely built with these types of fixtures. Lead exposure can cause developmental issues, lowered IQ, and damages to the kidneys and brain.

Disinfection Byproducts In Louisville’s Drinking Water

DBPs are formed when chlorine or chloramine-based disinfectants are routinely added to the water supply to kill bacteria. EPA regulates two categories or DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids-5 (HAA5). Concentrations of HAA5 averaged 27.3 parts per billion and reached levels as high as 46.1 parts per billion. The EPA Maximum Contaminant Level for this compound is 60 parts per billion. Concentrations of TTHMs averaged 27.8 parts per billion, but reached levels as high as 39.8 parts per billion. EPA’s Maximum Contaminant Level is 80 parts per billion for TTHMs. Disinfection Byproducts are a category of emerging contaminants which means they have been detected in drinking water but the risk to human health is unknown. Health and regulatory agencies have very little knowledge about the adverse health effects of DBPs, and their toxicity potential. EPA has stated that they have been linked to an increased risk of various types of cancers and problems with the central nervous system.

Chloramine In Louisville’s Drinking Water

Louisville disinfects its drinking water with chloramine, which is a disinfectant similar to chlorine. Chloramine is primarily responsible for what many Louisville customers report as the “bad taste” or “pool smell” of tap water. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Louisville use a special filtration media that is purposefully designed to remove chloramine.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Louisville’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Analies Dyjak  |  Policy Nerd

**Updated September 30, 2020 to include current data

For Hydroviv’s assessment of Norman, Oklahoma drinking water, we aggregated water quality test data provided by the city's Consumer Confidence Report, the U.S. Environmental Protection Agency and supplemental health information. We cross referenced the city’s water quality test data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Norman's drinking water.

Chromium 6 In Norman's Drinking Water

Chromium 6 is a highly toxic metal that is currently unregulated by the EPA. Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. Norman, Oklahoma has some of the highest levels of Chromium 6 in the country. In the 2020 Consumer Confidence Report, the city of Norman tested for Total Chromium, instead of Chromium 6 - which is a far more toxic type of chromium. According to test data completed by the Environmental Working Group, the average concentration of Chromium 6 detected in Norman's drinking water was 39,300 parts per trillion. For a bit of perspective, these levels are as high as 1,965 times higher than the concentration determined to have negligible impact on cancer risk. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress are health effects associated with high levels of chromium 6 exposure.

Arsenic in Norman's Drinking Water

Norman, Oklahoma has a big problem with Arsenic in drinking water. The current levels of Arsenic in Norman drinking water are 14.4 parts per billion. The allowable level (also known as the Maximum Contaminant Level) for Arsenic in municipal tap water is 10 parts per billion. This is the first time in recent years that Norman has had high levels of Arsenic in drinking water. In previous years, Arsenic levels have been 2 parts per billion, which is well below the federal standard. 

Chloramine In Norman’s Drinking Water

While most municipalities use chlorine as the primary drinking water disinfectant, Norman’s drinking water is disinfected with chloramine. Chloramine is primarily responsible for what many customers report as the “bad taste” or “pool smell” of tap water. Concentrations were detected as high as 3.9 parts per million in treated water, which is just under the EPA Maximum Contaminant Level of 4 parts per million. Unlike chlorine, chloramine does not dissipate if a container of water is left in the refrigerator overnight. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Norman use a special filtration media that is purposefully designed to remove chloramine.

Strontium In Norman’s Drinking Water

Strontium is an unregulated contaminant that was also detected in this years water quality report. Strontium naturally occurs in certain vegetables, grain, and livestock but is also a byproduct of coal and oil combustion. Concentrations of Strontium in Norman's drinking water were detected as high as 442 parts per billion. For a bit of perspective, this is twice as high as concentrations found in Oklahoma City. According to the Agency for Toxic Substances and Disease Registry, children are the most susceptible age group to the negative health effects associated with Strontium exposure. Bone growth can be effected if children ingest high enough concentrations through drinking water.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Norman's tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.