Water Quality InformationWritten By Actual Experts

We get a lot of questions from people about Whole House Filters. Because Hydroviv has a “Help No Matter What” mindset when it comes to technical support, we sometimes find ourselves helping our website's visitors evaluate products that we don’t sell!

What Is a Whole House Water Filter?

As the name suggests, whole house filters are installed on a home’s main water supply, so they process all water that comes into the house, including water used to flush toilets, do laundry, and water the lawn.

How Much Should I Expect To Pay For A Whole House Water Filter?

Systems marketed as whole home water filter systems can range in price from less than $100 to $10,000. Because the system is installed on the main water supply line, these systems typically require a licensed plumber for installation, which can add considerably to the overall system cost. Replacement cartridges can also be a significant cost for whole house filter systems. Because ALL incoming water is filtered by whole house systems, cartridges need to be replaced more frequently than if the same cartridge is used in a point of use application.

How Effective Are Whole House Water Filters?

Chemical Removal

With whole home water filters, you typically get what you pay for. Most whole house systems are designed to process large volumes of water for water softening and chlorine removal, and are not designed to remove things like chloramine, arsenic, disinfection byproducts, or lead. If you spend several thousand dollars on a high-end whole house system, pay to have it installed by a plumber, and replace the filtration media as prescribed, the system will probably perform as advertised. Just make sure that the system is designed to filter the chemicals you want removed... we have talked to people that have spent thousands on a whole house filter only to learn after the fact that it does not filter lead! On the other end of the price spectrum, most of the low cost whole house filters are only good for removing sediment from the water, and don't do a good job removing dissolved chemicals.  The other thing to keep in mind is that if you remove chlorine from your home's water at the point where it enters the home, you introduce the risk of bacteria growing in all pipes downstream of the filter, because the filter removes the disinfectant.

Flow Rate & Impact On Water Pressure

Another performance aspect to consider is the impact on your home's water pressure, because a whole house filter can act as a "choke point" for water delivery. You don't want to run into a situation where there isn't enough water pressure to take a shower because the dishwasher is running and someone is brushing their teeth. Be sure to take into account that the cartridges used in single stage whole house filters become clogged over time, and the water pressure can drop dramatically throughout the filter's lifetime. A good plumber is a very good resource for helping you calculate your home's water demand and thus plan for the right water filter for your main water supply.

How Good Are "General Purpose" Whole House Water Filters?

Simply put, it's not possible to build a whole home water filter that "filters everything bad" from your water on a whole house scale. For that level of filtration, you need to filter at the point of use (e.g. individual faucets- more on this below). However, there are some applications where whole house filtration makes sense. For example, water with a very high particulate load can clog up your point of use filters very quickly, so a whole house prefilter to address particles and sediment could be useful in this instance. 

Hydroviv’s point of use filtration systems are designed to filter the water in your home used for drinking, washing food, cooking, and showering. By remaining focused on these applications (and ignoring the water used in toilets & washing machines), we are able offer consumers high-performance water filtration systems that cost less than the competition, and don’t require a plumber to install.

Where Can You Go For Advice On Whole House Water Filters?

Other Great Articles We Think You'd Enjoy:
What is Chromium-6?
What You Need To Know About Fluoride In Tap Water
Is Lead Lurking In New York City Tap Water?

People regularly come to our water nerds with questions about fluoride in drinking water because they "heard something" or "read something." Unfortunately, most of what's on the internet on this topic is not based on credible science, with a good chunk of it being a flat out lie. To make matters worse, some of the people peddling conspiracy theories used to have legitimate medical practices, but have decided to cash in on their titles and peddle "health products." Instead of cashing in on this hysteria (like a lot of other water filtration companies), we have made the decision to be a credible source of information.

Why Do Cities Add Fluoride To Drinking Water?

Cities add fluoride to drinking water to prevent tooth decay. When fluoride comes in contact with your tooth's enamel, it hardens the surface and makes it resistant to decay. Fluoridated tap water is often the only source of fluoride for lower income populations that do not have access to proper dental care or products. We wrote a more comprehensive article on this topic a little over a year ago.

Is Fluoride Bad For You?

Not in the way that inflammatory/conspiracy theory websites claim.

Most of the well-known side effects of excessive fluoride exposure are cosmetic, for example spots or discoloration of teeth. This typically happens when people expose their teeth to multiple fluoride sources (e.g. tap water, toothpaste, mouth wash). If a dentist notices early symptoms of this, they will often recommend that the patient switch to a fluoride-free toothpaste.

In areas with naturally excessive fluoride concentrations (several times more than what municipalities add to tap water), they can be at higher risk of bone fracture. This is extremely rare in the US.

One recent study that has received a lot of attention recently is looked at an apparent association between tap water fluoridation and hypothyroidism, but the work admittedly did not demonstrate cause & effect. Moreover, since the article was published, other public health scientists have been extremely critical of the work because of the way that groups of people were categorized (suggesting that the original study's researchers manipulated the data to get a desired result).

Is Fluoride Added To Tap Water Because The Government Needed To Find A Way To Dispose Nuclear Waste and Chemical Weapons?

Obviously not. Nuclear waste is stored, and chemical weapons are decomposed.

How Do I Filter Fluoride From Drinking Water?

If you decide that you want to filter fluoride from your water for the right reasons (not out of hysteria), there are a couple of credible options available.

Distillation

A quality water distiller can remove fluoride from water. The units that we have tested reduced fluoride concentrations between 40-70% of fluoride from the water.

Reverse Osmosis

For people who are willing to accept the downsides, many systems that use reverse osmosis can effectively reduce fluoride levels in drinking water.

Do Hydroviv's Scientists Filter Fluoride In Their Homes?

No. To build a filter that removes fluoride, we'd have to compromise the cartridge's performance against things like lead, arsenic, VOCs, Chromium 6, PFAS and other contaminants where there is conclusive evidence of negative health effects, and as scientists, we're just not comfortable doing this... even upon request. So no, our systems don't remove fluoride.

As always, we encourage people to take advantage of our "Help No Matter What" approach to technical support. Our water quality experts will help you solve your problem, even if you have no intention of buying a Hydroviv Water Filter for your home.

Other Articles We Think You'll Enjoy

History Of Tap Water Fluoridation In Municipal Tap Water
Things To Consider Before Buying A Reverse Osmosis System
The 5 Most Important Things To Know About Chromium 6 In Drinking Water

Analies Dyjak, M.A.  |  Water Nerd

For Hydroviv’s assessment of Omaha, Nebraska drinking water, we collected water quality test data from the city’s Consumer Confidence Report and the U.S. Environmental Protection Agency. We cross referenced Omaha's water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Omaha's drinking water.

Where Does Omaha Source Its Drinking Water? 

Omaha draws its tap and drinking water from the Missouri River, Platte River, and the Dakota Sandstone aquifer.

Lead in Omaha’s Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing, soldered joints, and fixtures. Based on the 2017 water quality report, lead levels in Omaha ranged from 0.5 to 14.9 parts per billion. 10% of taps had levels over 6.4 parts per billion, which is barely in compliance with the loose EPA standard of 15 parts per billion. However, if you were to ask toxicologists, pediatricians, or the CDC they would all tell you that there is no safe minimum level of lead. Lead is a neurotoxin that can have serious developmental effects on children.

Arsenic in Omaha’s Drinking Water

Arsenic is a heavy metal that typically leaches into groundwater as surrounding bedrock naturally weathers overtime. According to the most recent data, Arsenic concentrations ranged from 1 to 3.93 parts per billion in Omaha drinking water. EPA set a Maximum Contaminant Level of 10 parts per billion for Arsenic, but several health and regulatory agencies believe this level should be reduced to 1 or even 0 parts per billion. Arsenic is a toxic substance that is linked to a long list of health problems in humans. For example, arsenic can cause a number of different cancers (e.g. skin, bladder, lung, liver, prostate), as well as create non-cancerous problems with cardiovascular (heart/blood vessels), pulmonary (lungs), immune, neurological (brain), and endocrine (e.g. diabetes) systems. Hydroviv recommends purchasing a filter that is optimized to remove Arsenic from your drinking water, especially if you’re serviced by a private well.

Disinfection By-Products in Omaha’s Drinking Water

When water treatment facilities sanitize the water with chemicals such as chlorine, different contaminants can be created. These types of contaminants are called Disinfectant by products or DBPs. They are split into two categories: Total Trihalomethanes (TTHMs) and Haloacetic Acids-5 (HAA5). Concentrations of TTHMs averaged 40.2 parts per billion but were detected as high as 66.5 parts per billion. HAA5 concentrations averaged 19.6 parts per billion but were detected as high as 37.6 parts per billion. For a bit of perspective, EPA set a Maximum Contamination Level of 80 parts per billion for TTHMs and 60 parts per billion for HAA5.

Chromium 6 In Omaha’s Drinking Water

Chromium 6 is an unregulated toxic metal that's associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. Concentrations of Chromium 6 were found to be ranging from 130 parts per trillion to 1400 parts per trillion. These levels are nearly 70 times higher than the concentration determined to have a negligible impact on cancer risk. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Ingestion of extremely high doses of chromium 6 compounds can cause acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress which may result in death.

Synthetic Organic Contaminants in Omaha's Drinking Water

Di(2-ethylhexyl)phthalate was also detected in Omaha's drinking water. This chemical is known for its ability to make plastic flexible. A toxicology report has shown that this chemical is known to cause reproductive problems in young males, stomach pains, and is labeled as a probable carcinogen. EPA set a Maximum Contaminant Level of 6 parts per billion for this contaminant. The Omaha water quality problem report detected concentrations of these chemicals ranging from less than 2 parts per billion to 3.11 parts per billion.

Other Articles We Think You Might Enjoy:
Lead Contamination In Drinking Water
Disinfection Byproducts In Drinking Water: What You Need To Know
5 Things To Know About Arsenic In Drinking Water

Ernesto Esquivel  |  Water Nerd
**Updated August 2, 2019 to include current data

For Hydroviv’s assessment of Louisville, Kentucky’s tap and drinking water problems, we collected water quality test data from Louisville and the U.S. Environmental Protection Agency. We cross referenced Louisville water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Louisville’s drinking water.

Where Does Louisville Source Its Drinking Water?

Louisville sources its drinking water from the Ohio River. The utility provider, Louisville Water, treats and distributes drinking water to the metropolitan area as well as surrounding counties, including; Bullitt, Hardin, Nelson, Oldham, Shelby, and Spencer.

Lead In Louisville’s Drinking Water

Lead enters tap water through old lead service pipes and lead-containing plumbing. 10% of sites that were tested for lead had concentrations over 4.7 parts per billion, and the highest level collected was 10.2 parts per billion. The City of Louisville only received data from 50 residential taps, so the small data set may not be representative of the actual scope of the lead problem. Environmental Protection Agency, Center for Disease Control and American Academy of Pediatrics all recognize that there is no safe level of lead for children. Additionally, once water hits lead plumbing and lead fixtures, these measurements will increase significantly. Houses built before 1986 were most likely built with these types of fixtures. Lead exposure can cause developmental issues, lowered IQ, and damages to the kidneys and brain.

Disinfection Byproducts In Louisville’s Drinking Water

DBPs are formed when chlorine or chloramine-based disinfectants are routinely added to the water supply to kill bacteria. EPA regulates two categories or DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids-5 (HAA5). Concentrations of HAA5 averaged 27.3 parts per billion and reached levels as high as 46.1 parts per billion. The EPA Maximum Contaminant Level for this compound is 60 parts per billion. Concentrations of TTHMs averaged 27.8 parts per billion, but reached levels as high as 39.8 parts per billion. EPA’s Maximum Contaminant Level is 80 parts per billion for TTHMs. Disinfection Byproducts are a category of emerging contaminants which means they have been detected in drinking water but the risk to human health is unknown. Health and regulatory agencies have very little knowledge about the adverse health effects of DBPs, and their toxicity potential. EPA has stated that they have been linked to an increased risk of various types of cancers and problems with the central nervous system.

Chloramine In Louisville’s Drinking Water

Louisville disinfects its drinking water with chloramine, which is a disinfectant similar to chlorine. Chloramine is primarily responsible for what many Louisville customers report as the “bad taste” or “pool smell” of tap water. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Louisville use a special filtration media that is purposefully designed to remove chloramine.

It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Louisville’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.

Other Articles We Think You Might Enjoy:
Lead Contamination In Drinking Water
What Is The Difference Between Chlorine and Chloramine In Drinking Water?
Disinfection Byproducts In Drinking Water: What You Need To Know

Water for the San José region comes from both surface and groundwater. Hydroviv's science team has aggregated water quality test data from San José Water and the City of San José, the U.S. Environmental Protection Agency (EPA), the Environmental Working Group, and the US Geological Survey. The custom water filters that we build for our customers in the San José area are optimized with this research in mind.